Cgs synth

>What is beginning?

The tag the wiper connects to when the pot is rotated fully
counter-clockwise. From the rear of the pot, with the tags up, it is the
left.. The center pin is the wiper.

>Do i then wire ground to the right wiper or what would be called 'pot end'
>using this terminology? or is it not needed?

If the circuit diagram and/or wiring instructions do not specify a ground
connection, then don't add one. In the case of an older board using hte
beginning center end markings (B, C and E) all three would be on the PCB if
needed.

>Last question is there any problem using 5mm LED's over the 3mm ones? these
>are the specs from the ones i want to use :

No. The difference between sizes is literally the size. Differences between
colors are, however, significant in some instances.

4000mcd will be WAY too bright. Use a 10k in series with it instead of 1k.

Ken

>Reverse Voltage (VR) 5V
>Reverse Current ( at VR=5V) <=10uA
>Operating Temperature -40C ~ 85C
>Storage Temperature -40C ~ 100C
>Lead Soldering Temperature 260C for 5 seconds (Max)
>Power Dissipation 4.5 mW
>Emitted Color Blue
>Wavelength (20mA) 465 - 475nm
>Lens Appearance Water Clear
>Absolute max Rating Pd : 120 mW
>IF : 20 mA
>Peak IF : 120 mA
>Electro-optical Date (20mA) VF : 3.2V (Max 3.4V)
>IV : 4,000 mcd (3,500 mcd Min, 4,500mcd Max)
>
>
>Anyway thanks for the answers im sure will be forthcoming ;) can't wait to
>get this baby powered ;) and if you wnat to reply direct email to
>brett.maddaford@...
>
>cya
>Brett
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>