Cgs synth

thanks sci700

regards
--- sci700 <dpf@...> wrote:


---------------------------------
hi, if it's not the regular metal version but the
black to-92 type, the emitter seems to
be pin one (flat side down, legs towards you, pin one
is the left one). So the flat side
should be facing left (away from the unicorn on the
pcb...).
i had to find it out the hard way, did it wrong the
first time...
/daniel




--- In cgs_synth@yahoogroups.com, "mesonproductions"
<mesonproductions@y...>
wrote:

> I with my limited knowledge thus far got some 2N2222

for the Steiner

> VCF from jaycar and are unsure as to the placing

them on the PCB.

>
> their shape seems somewhat different to that on the

board. Can they be

> used, and if so, which bit goes into which hole on

the board.

> Alternatively, where can I get the 2N2222 that is a

more suitable

> design for the PCB.
>
> cheers

The CGS Modular Synth home page:
http://www.cgs.synth.net/




---------------------------------
YAHOO! GROUPS LINKS


Visit your group "cgs_synth" on the web.

To unsubscribe from this group, send an email to:
cgs_synth-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.


---------------------------------









____________________________________________________
Do you Yahoo!?
Try Yahoo! Photomail Beta: Send up to 300 photos in one email!
http://au.photomail.mail.yahoo.com