Sounds like a problem withthe two transistor amplifier stage - there isn't
enough gain. Check you have all the right parts in it.
Ken
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
enough gain. Check you have all the right parts in it.
Ken
>Put the synthacon VCF together, and it seems to be working, but it will_______________________________________________________________________
>not self oscillate. It doesn't seem like the resonance is working
>correctly. The res definitely changes the amplitude, and sharpens up a
>low-pass filtered square wave somewhat, but you cannot seen any
>overshoot or ringing at the top or bottom of the square wave. I
>reduced the 1k resistor just before the variable resistor to 330 ohms,
>and it is a little more "agressive" sounding now, but nothing like I
>was expecting, and nowhere near self-oscillation. Any ideas?
>
>I have the REV-1 board, which doesn't seem to have any problems with
>polarized components being in backwards.
>
>Any help would be much appreciated. I have a scope, and am pretty good
>at de-bugging, so I may figure this out given enough time...
>
>best regards,
>-gerald
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>