OK, finally I made a module-list showing all the modules I used in my
halfmodular vector-synth. I refer to this picture on moogulators site:
http://www.sequencer.de/pix/auralesque/Auralesquerechts.jpg
Upper row from LEFT to right:
Portamento: Curetronic "Tool"
VCO 1 and 2: Oakley
Frequency Divider: Blacet
Wave Multipliers: CGS Ken Stone
Vector Sources: myself :-). Just 4 Switches
Vector VCA's with Mixer: Marc Bareilles 4VCA in linear mode SSM 2164
"Steiner Parker": Papareil Synth Labs and Curetronic
"Moog": Curetronic "vcf-cv-reso"
VCA 1: Curetronic
LFO/HFO 1: Curetronic (its the "3rd" VCO, but mainly used as a LFO)
LFO2 and LFO2: Curetronic Dual Shape LFO
EG 1 and EG 2: Curetronic, I added swichable Capacitors.
EG 3: VC-ADSR from Oakley
Lower row from LEFT to right:
Real Ring Modulator: CGS Ken Stone (no Pots, its behind the Jacks)
Mini Wave: Blacet/Wiard
Saw Animators: Cyndustries (dual module)
Noise and Random: Doepfer A-100 (!)
All Vector-Modules: JAG from Wiard, Joystick from Wiard and 2 Mixer-
Processors from Blacet (X and Y)
Pre Mix: Mixer Module from Curetronic
Polivoks: Papareil Synth Labs!
Comb Filter: Analogue Systems (I also used a DC-Mixer from CGS here)
Post Mix: Mixer Module from Curetronic
VCA 2: Curetronic
Attenuator: Just a 100K lin Pot
Slew Limiter: Curetronic "Tool" Module
Gate Delay: Curetronic "Tool" Module
Out Mix: At the moment just a Pot and two Resistors, will change into
a real Panner
Then, there are 3 Multiples and behind the right Jacks is a Midi-
Module from Papareil Synth Labs, a Dual Sample and Hold-Module
anddual Inverters from Curetronic and one DC-Mixer behind the
Jacks "DC-Mixer".
Everything works great so far. I will change the Polivoks Filters
IC's from LM4250 to UA776 when I get this IC. Between Modules I had
to give great attention to Levels, otherwise the "Bypass" Knobs
wouldn't be very useful. I have absolutely NO crosstalk! I used more
than 200 meters of wiring behind the Frontplate to connect everything
to the Jacks AND to the 15 big 12-Step-Modulation switches.
Olivier
halfmodular vector-synth. I refer to this picture on moogulators site:
http://www.sequencer.de/pix/auralesque/Auralesquerechts.jpg
Upper row from LEFT to right:
Portamento: Curetronic "Tool"
VCO 1 and 2: Oakley
Frequency Divider: Blacet
Wave Multipliers: CGS Ken Stone
Vector Sources: myself :-). Just 4 Switches
Vector VCA's with Mixer: Marc Bareilles 4VCA in linear mode SSM 2164
"Steiner Parker": Papareil Synth Labs and Curetronic
"Moog": Curetronic "vcf-cv-reso"
VCA 1: Curetronic
LFO/HFO 1: Curetronic (its the "3rd" VCO, but mainly used as a LFO)
LFO2 and LFO2: Curetronic Dual Shape LFO
EG 1 and EG 2: Curetronic, I added swichable Capacitors.
EG 3: VC-ADSR from Oakley
Lower row from LEFT to right:
Real Ring Modulator: CGS Ken Stone (no Pots, its behind the Jacks)
Mini Wave: Blacet/Wiard
Saw Animators: Cyndustries (dual module)
Noise and Random: Doepfer A-100 (!)
All Vector-Modules: JAG from Wiard, Joystick from Wiard and 2 Mixer-
Processors from Blacet (X and Y)
Pre Mix: Mixer Module from Curetronic
Polivoks: Papareil Synth Labs!
Comb Filter: Analogue Systems (I also used a DC-Mixer from CGS here)
Post Mix: Mixer Module from Curetronic
VCA 2: Curetronic
Attenuator: Just a 100K lin Pot
Slew Limiter: Curetronic "Tool" Module
Gate Delay: Curetronic "Tool" Module
Out Mix: At the moment just a Pot and two Resistors, will change into
a real Panner
Then, there are 3 Multiples and behind the right Jacks is a Midi-
Module from Papareil Synth Labs, a Dual Sample and Hold-Module
anddual Inverters from Curetronic and one DC-Mixer behind the
Jacks "DC-Mixer".
Everything works great so far. I will change the Polivoks Filters
IC's from LM4250 to UA776 when I get this IC. Between Modules I had
to give great attention to Levels, otherwise the "Bypass" Knobs
wouldn't be very useful. I have absolutely NO crosstalk! I used more
than 200 meters of wiring behind the Frontplate to connect everything
to the Jacks AND to the 15 big 12-Step-Modulation switches.
Olivier