Oliver
Is it ok to post your post on www.synforum.nl <http://www.synforum.nl> ?
There is a tread about your semi modular.
Regards.
Dennis
Is it ok to post your post on www.synforum.nl <http://www.synforum.nl> ?
There is a tread about your semi modular.
Regards.
Dennis
On 8/30/05, waveform100 <googol@...> wrote:
>
> OK, finally I made a module-list showing all the modules I used in my
> halfmodular vector-synth. I refer to this picture on moogulators site:
>
> http://www.sequencer.de/pix/auralesque/Auralesquerechts.jpg
>
> Upper row from LEFT to right:
>
> Portamento: Curetronic "Tool"
> VCO 1 and 2: Oakley
> Frequency Divider: Blacet
> Wave Multipliers: CGS Ken Stone
> Vector Sources: myself :-). Just 4 Switches
> Vector VCA's with Mixer: Marc Bareilles 4VCA in linear mode SSM 2164
> "Steiner Parker": Papareil Synth Labs and Curetronic
> "Moog": Curetronic "vcf-cv-reso"
> VCA 1: Curetronic
> LFO/HFO 1: Curetronic (its the "3rd" VCO, but mainly used as a LFO)
> LFO2 and LFO2: Curetronic Dual Shape LFO
> EG 1 and EG 2: Curetronic, I added swichable Capacitors.
> EG 3: VC-ADSR from Oakley
>
> Lower row from LEFT to right:
>
> Real Ring Modulator: CGS Ken Stone (no Pots, its behind the Jacks)
> Mini Wave: Blacet/Wiard
> Saw Animators: Cyndustries (dual module)
> Noise and Random: Doepfer A-100 (!)
> All Vector-Modules: JAG from Wiard, Joystick from Wiard and 2 Mixer-
> Processors from Blacet (X and Y)
> Pre Mix: Mixer Module from Curetronic
> Polivoks: Papareil Synth Labs!
> Comb Filter: Analogue Systems (I also used a DC-Mixer from CGS here)
> Post Mix: Mixer Module from Curetronic
> VCA 2: Curetronic
> Attenuator: Just a 100K lin Pot
> Slew Limiter: Curetronic "Tool" Module
> Gate Delay: Curetronic "Tool" Module
> Out Mix: At the moment just a Pot and two Resistors, will change into
> a real Panner
> Then, there are 3 Multiples and behind the right Jacks is a Midi-
> Module from Papareil Synth Labs, a Dual Sample and Hold-Module
> anddual Inverters from Curetronic and one DC-Mixer behind the
> Jacks "DC-Mixer".
>
> Everything works great so far. I will change the Polivoks Filters
> IC's from LM4250 to UA776 when I get this IC. Between Modules I had
> to give great attention to Levels, otherwise the "Bypass" Knobs
> wouldn't be very useful. I have absolutely NO crosstalk! I used more
> than 200 meters of wiring behind the Frontplate to connect everything
> to the Jacks AND to the 15 big 12-Step-Modulation switches.
>
> Olivier
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
--
----------------------------------------------------------------------------------
- Gear pictures at: http://jx.riscy.net/gallery/albums.php -
- -
- Music at: http://www.soundclick.com/trestrois -
-
- Blog at: http://monopoly.web-log.nl/ -
----------------------------------------------------------------------------------
[Non-text portions of this message have been removed]
