Cgs synth

Yes, of course! I am going to dechiffre dutch...

--- In cgs_synth@yahoogroups.com, Dennis Verschoor <modular@g...>
wrote:

> Oliver
>
> Is it ok to post your post on www.synforum.nl

<http://www.synforum.nl> ?

> There is a tread about your semi modular.
>
> Regards.
>
> Dennis
>
> On 8/30/05, waveform100 <googol@g...> wrote:
> >
> > OK, finally I made a module-list showing all the modules I used

in my

> > halfmodular vector-synth. I refer to this picture on moogulators

site:

> >
> > http://www.sequencer.de/pix/auralesque/Auralesquerechts.jpg
> >
> > Upper row from LEFT to right:
> >
> > Portamento: Curetronic "Tool"
> > VCO 1 and 2: Oakley
> > Frequency Divider: Blacet
> > Wave Multipliers: CGS Ken Stone
> > Vector Sources: myself :-). Just 4 Switches
> > Vector VCA's with Mixer: Marc Bareilles 4VCA in linear mode SSM

2164

> > "Steiner Parker": Papareil Synth Labs and Curetronic
> > "Moog": Curetronic "vcf-cv-reso"
> > VCA 1: Curetronic
> > LFO/HFO 1: Curetronic (its the "3rd" VCO, but mainly used as a

LFO)

> > LFO2 and LFO2: Curetronic Dual Shape LFO
> > EG 1 and EG 2: Curetronic, I added swichable Capacitors.
> > EG 3: VC-ADSR from Oakley
> >
> > Lower row from LEFT to right:
> >
> > Real Ring Modulator: CGS Ken Stone (no Pots, its behind the Jacks)
> > Mini Wave: Blacet/Wiard
> > Saw Animators: Cyndustries (dual module)
> > Noise and Random: Doepfer A-100 (!)
> > All Vector-Modules: JAG from Wiard, Joystick from Wiard and 2

Mixer-

> > Processors from Blacet (X and Y)
> > Pre Mix: Mixer Module from Curetronic
> > Polivoks: Papareil Synth Labs!
> > Comb Filter: Analogue Systems (I also used a DC-Mixer from CGS

here)

> > Post Mix: Mixer Module from Curetronic
> > VCA 2: Curetronic
> > Attenuator: Just a 100K lin Pot
> > Slew Limiter: Curetronic "Tool" Module
> > Gate Delay: Curetronic "Tool" Module
> > Out Mix: At the moment just a Pot and two Resistors, will change

into

> > a real Panner
> > Then, there are 3 Multiples and behind the right Jacks is a Midi-
> > Module from Papareil Synth Labs, a Dual Sample and Hold-Module
> > anddual Inverters from Curetronic and one DC-Mixer behind the
> > Jacks "DC-Mixer".
> >
> > Everything works great so far. I will change the Polivoks Filters
> > IC's from LM4250 to UA776 when I get this IC. Between Modules I

had

> > to give great attention to Levels, otherwise the "Bypass" Knobs
> > wouldn't be very useful. I have absolutely NO crosstalk! I used

more

> > than 200 meters of wiring behind the Frontplate to connect

everything

> > to the Jacks AND to the 15 big 12-Step-Modulation switches.
> >
> > Olivier
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> --------------------------------------------------------------------

--------------

> - Gear pictures at: http://jx.riscy.net/gallery/albums.php -
> - -
> - Music at: http://www.soundclick.com/trestrois -
> -
> - Blog at: http://monopoly.web-log.nl/ -
> --------------------------------------------------------------------

--------------

>
>
> [Non-text portions of this message have been removed]