Thanks. First time I ever heard of Curetronic. Their site is in German.
http://www.curetronic.de/curetronic/index-start.shtml
Do the Curetronic modules come as kits? Without panels? What made you
choose them over Oakley and Blacet or others?
-Richard Brewster
waveform100 wrote:
http://www.curetronic.de/curetronic/index-start.shtml
Do the Curetronic modules come as kits? Without panels? What made you
choose them over Oakley and Blacet or others?
-Richard Brewster
waveform100 wrote:
>OK, finally I made a module-list showing all the modules I used in my
>halfmodular vector-synth. I refer to this picture on moogulators site:
>
>http://www.sequencer.de/pix/auralesque/Auralesquerechts.jpg
>
>Upper row from LEFT to right:
>
>Portamento: Curetronic "Tool"
>VCO 1 and 2: Oakley
>Frequency Divider: Blacet
>Wave Multipliers: CGS Ken Stone
>Vector Sources: myself :-). Just 4 Switches
>Vector VCA's with Mixer: Marc Bareilles 4VCA in linear mode SSM 2164
>"Steiner Parker": Papareil Synth Labs and Curetronic
>"Moog": Curetronic "vcf-cv-reso"
>VCA 1: Curetronic
>LFO/HFO 1: Curetronic (its the "3rd" VCO, but mainly used as a LFO)
>LFO2 and LFO2: Curetronic Dual Shape LFO
>EG 1 and EG 2: Curetronic, I added swichable Capacitors.
>EG 3: VC-ADSR from Oakley
>
>Lower row from LEFT to right:
>
>Real Ring Modulator: CGS Ken Stone (no Pots, its behind the Jacks)
>Mini Wave: Blacet/Wiard
>Saw Animators: Cyndustries (dual module)
>Noise and Random: Doepfer A-100 (!)
>All Vector-Modules: JAG from Wiard, Joystick from Wiard and 2 Mixer-
>Processors from Blacet (X and Y)
>Pre Mix: Mixer Module from Curetronic
>Polivoks: Papareil Synth Labs!
>Comb Filter: Analogue Systems (I also used a DC-Mixer from CGS here)
>Post Mix: Mixer Module from Curetronic
>VCA 2: Curetronic
>Attenuator: Just a 100K lin Pot
>Slew Limiter: Curetronic "Tool" Module
>Gate Delay: Curetronic "Tool" Module
>Out Mix: At the moment just a Pot and two Resistors, will change into
>a real Panner
>Then, there are 3 Multiples and behind the right Jacks is a Midi-
>Module from Papareil Synth Labs, a Dual Sample and Hold-Module
>anddual Inverters from Curetronic and one DC-Mixer behind the
>Jacks "DC-Mixer".
>
>Everything works great so far. I will change the Polivoks Filters
>IC's from LM4250 to UA776 when I get this IC. Between Modules I had
>to give great attention to Levels, otherwise the "Bypass" Knobs
>wouldn't be very useful. I have absolutely NO crosstalk! I used more
>than 200 meters of wiring behind the Frontplate to connect everything
>to the Jacks AND to the 15 big 12-Step-Modulation switches.
>
>Olivier
>
>
>
>
>
>
>
