Cgs synth

A bench power supply would be nice. Hrmmmm... Do you recommend a
+/-15V bench PSU?

I would rather do it this way, because it's a lot less money. But
those powered breadboards are nice because I don't know how to connect
a bench PSU to a plain breadboard.

I'll check some things out. I'm pretty excited!

Another note: do any of you know where to find some simple modular
synthesizer circuits that would fit on a breadboard easily?

Cole

--- In cgs_synth@yahoogroups.com, "Adam Schabtach" <adam@s...> wrote:
>
> You can obtain just the breadboard itself for a lot less money, and you
> could either use your modular's power supply or buy/build a bench
supply.
> Total cost would still be less than that package. You won't need
both +/-12
> and +/-15V supplies (one or the other--probably 15 if you're using MOTM
> which I believe you are), you may not need +5, and you probably
won't need
> the digital I/O stuff. The function generator would be handy now and
then,
> but not essential. So in other words, buying that package means spending
> money on stuff you aren't likely to use.
>
> --Adam
>
> > -----Original Message-----
> > From: brownchonald [mailto:chonald@g...]
> > Sent: Monday, October 17, 2005 7:37 PM
> > To: cgs_synth@yahoogroups.com
> > Subject: [cgs_synth] Prototype breadboard?
> >
> > Hello,
> >
> > Do you guys recommend a prototyping breadboard? Solderless and
> > powered, to build some of the module circuits that are online.
> >
> > I've been looking at this:
> > http://www.elexp.com/tst_234.htm
> >
> > but not sure if I need all those knobs and switches.
> >
> > Thhanks,
> > Cole
> >
> >
> >
> >
> >
> >
> > The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>