I am about to build by dual gate sequencer and am designing a panel for it. In reading the instructions on the website I ran across the following statement which differs from some of the panel designs I have seen people make.
"The following outputs are for internal use only, when connected to the switch bank and output buffer boards: ODIS (output disable), CLK OUT (clock out), C1 to C8 (column outputs). Do NOT bring these output out to front panel jacks, as you may damage the circuitry. "
Can I bring out the Column Outputs for stage outputs to the panel?
...If bringing them out is their pulse length dependant on the switch settings or are the like a simple pulse out with the same length each stage regardless of the switch setting?
Can I bring out the clock through output to the panel?
Can I bring out the ODIS and what exactly does it do if so?
Separately, do the full/mix outputs really = gate outputs with varying gate length depending on the switches?
Thank you for the help folks!
One last thing, can you mod something to cascade 1 set of switches to the second set for 16 step lengths? Figure this one is a long shot.
Thomas White
Natural Rhythm
www.naturalrhythmmusic.com
---------------------------------
Blab-away for as little as 1ยข/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice.
[Non-text portions of this message have been removed]
"The following outputs are for internal use only, when connected to the switch bank and output buffer boards: ODIS (output disable), CLK OUT (clock out), C1 to C8 (column outputs). Do NOT bring these output out to front panel jacks, as you may damage the circuitry. "
Can I bring out the Column Outputs for stage outputs to the panel?
...If bringing them out is their pulse length dependant on the switch settings or are the like a simple pulse out with the same length each stage regardless of the switch setting?
Can I bring out the clock through output to the panel?
Can I bring out the ODIS and what exactly does it do if so?
Separately, do the full/mix outputs really = gate outputs with varying gate length depending on the switches?
Thank you for the help folks!
One last thing, can you mod something to cascade 1 set of switches to the second set for 16 step lengths? Figure this one is a long shot.
Thomas White
Natural Rhythm
www.naturalrhythmmusic.com
---------------------------------
Blab-away for as little as 1ยข/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice.
[Non-text portions of this message have been removed]