Cgs synth

Thanks Mate. Makes sense to me now.

Appreciate it!

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> Two caps near the socket as mentioned. Each has one leg near the
edge of the
> board, and one a little further in.
>
> A third I forgot about, directly between pins 4 and 8 of the IC,
again on
> small hole-less square pads.
>
> Ken
>
> >Ken,
> >
> >I see four pads. How exactly should I solder the caps in? I'm just
> >not sure about the orientation.
> >
> >There are only two places for these caps, right?
> >
> >Cole
> >
> >--- In cgs_synth@yahoogroups.com, sasami@ wrote:
> >>
> >> Big square pads with no holes under the input socket.
> >>
> >> Ken
> >>
> >> >Where exactly do I solder the bypass capacitors on the under side of
> >> >the PCB?
> >> >
> >> >I see a few pads, but I'm not exactly sure where they go exactly.
> >> >
> >> >Thanks for the help,
> >> >Cole
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >> >
> >> >Yahoo! Groups Links
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
_______________________________________________________________________
> >> Ken Stone sasami@ or sasami@
> >> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> >> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
> >>
> >
> >
> >
> >
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... or sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>