the paragraph beginning "When the Loop/Hold switch is set to "Hold""
has all the goodies :-)
has all the goodies :-)
>At 11:05 PM 11/7/2006, scottnoanh@... wrote:
>> > Oh! [blush] I'll need to *read* that article. I just assumed that it
>> > was a typical 4017-based sequencer.
>>
>>Typical? Sir, this is the CGS list. Drop and give me 20.
>
>Well, I had assumed that "expandable" meant that you could add
>multiple *rows* -- not columns. And then there's Ken's own
>description of the Gate Sequencer CV Adapter:
>
> The CV Adapter is an addition to the Gate Sequencer
>converting it to a traditional eight-step control voltage sequencer.
>
> It simply adds a single channel no-nonsense 8 step analog output. ...
>
>See? Even that says "traditional"! :-) Anyway...
>
>It's not clear to me how the clock control is supposed to be
>cascaded. Fine, you can simply connect the outputs together, but how
>is the chaining handled? Well, maybe the answer is in there, but I'm
>too tired to read it carefully right now.
>
>One. Two. Three. Four...
>--
>john