hi
"The LED resistors can be selected as needed. If you are using common
LEDs, 1k to 2k2 would be appropriate. If you are using any of the
super-bright modern LEDs for their unique colors, the resistors can be
much higher, 10k to 33k for example, so that the LEDs don't dazzle you"
cheers
Andrew
> And if so, is there any specific size of LED that would be best?from Ken's page on the Slope Detector, near the bottom -
"The LED resistors can be selected as needed. If you are using common
LEDs, 1k to 2k2 would be appropriate. If you are using any of the
super-bright modern LEDs for their unique colors, the resistors can be
much higher, 10k to 33k for example, so that the LEDs don't dazzle you"
cheers
Andrew
--- In cgs_synth@yahoogroups.com, "Andrew Scheidler" <xpandrew@...> wrote:
>
> On the Slope Detector PCB, there are three spots that have the
resistor "graphic", but the label says RLED.
>
> Does a Red LED go here, or something else?
>
> And if so, is there any specific size of LED that would be best?
>
>
> thanks :)
> Andrew
>