Read the page!! please!!!
RLED = resistor for LED:
The LED resistors can be selected as needed. If you are using common LEDs,
1k to 2k2 would be appropriate. If you are using any of the super-bright
modern LEDs for their unique colors, the resistors can be much higher, 10k
to 33k for example, so that the LEDs don't dazzle you.
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
RLED = resistor for LED:
The LED resistors can be selected as needed. If you are using common LEDs,
1k to 2k2 would be appropriate. If you are using any of the super-bright
modern LEDs for their unique colors, the resistors can be much higher, 10k
to 33k for example, so that the LEDs don't dazzle you.
>On the Slope Detector PCB, there are three spots that have the resistor"graphic", but the label says RLED.
>_______________________________________________________________________
>Does a Red LED go here, or something else?
>
>And if so, is there any specific size of LED that would be best?
>
>
>thanks :)
>Andrew
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>