pete -
check your wiring - you may have some wires too close to each other.
i noticed a similiar type of cross talk untill i moved one wire away
from
some others and it disapeered. i dont remember which wire this was
but im going to assume to the vcf input - good luck a great module
i have 2 down now :)
check your wiring - you may have some wires too close to each other.
i noticed a similiar type of cross talk untill i moved one wire away
from
some others and it disapeered. i dont remember which wire this was
but im going to assume to the vcf input - good luck a great module
i have 2 down now :)
On Jan 24, 2007, at 4:15 PM, Pete wrote:
> I have a bleed through problem with my Cynare. When the filter is
> all the
> way open I can hear bleed through coming form the "shimmer"
> generator. Its
> always there. I usually set the filter cutoff to be lower effectively
> cutting out the bleed through, and I usually have to adjust the
> envelope to
> get it just right. If I want to create a cymbal or hi hat sound I
> have to
> set the envelope pot to the top center position and open up the
> filter to
> get more of the high end freq's but this also allows the bleed
> through to be
> heard. Is there a fix for this?
>
> Thanks
> pete
>
> --
> http://www.myspace.com/23isgood
>
> [Non-text portions of this message have been removed]
>
>
>
dave wright
www.notbreathing.com
bastardita@...
[Non-text portions of this message have been removed]