If you have used TL072 in the output buffers, go bac to LM358. A minor
whoopsie on my part on last update.
Ken
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
whoopsie on my part on last update.
Ken
>I'm having strange voltages coming out of my Gate Sequencer's outputs._______________________________________________________________________
>The LEDs light normally as it goes around 1~8, and I do not have the
>rotary knob hooked up. The clock is a Blacet Binary Zone (50% duty
>cycle) which runs at +15v, although I tried it attenuated down to +10v
>with no change in the problem.
>
>Here's what comes out of the outputs:
>FULL: rests at about +1v, jumps up to about +12.5v when ON
>PULSE: always at +13.5v no matter what
>
>If I run the FULL output thru a Blacet Mixer/Processor to shift the
>voltage down (with the Bias control) it then works OK, but the PULSE is
>*always* high.
>
>Any hints or places in the circuit I can check voltages? I have a
>digital meter but no scope.
>
>Andrew
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>