hi there
I'm new to this Group.
I got a bunch of CGS PCBs a little time ago, and have some Questions.
I really don't understand electronics, but have allready built some
DIY PCB-based Modules with succes.
as long as they are working it's good ;)
Questions:
1. CGS29, Wave Multiplier
the question is about which wiring options one needs
( i allready asked at EM ( i'm Funky40) and got answers from fonik and
scott stites.
But after looking again to the CGS site, i'm confused again about the
wiring options.)
I tend to bring them all up to the Faceplate.( but this is very much )
So i put the question otherways:
A) what does i really not need ?
2.) CGS 31, digital noise
i'm not shure if i understand the wiring
A)CLK0 is the out of the 4046 that has to be normalized to the CLKI (
with a 1k res ), right ?
B) there are no Pots somewhere ?
3.) CGS 64, VCA
A) Can i solder normal caps to the SMD pads ?
I would like to build one Modul now as it will take some time till
i'll make my order where i get the SMD caps.
B ) there are different manufacturers for those caps.
should i care which one i choose ?
thanks in advance
I'm new to this Group.
I got a bunch of CGS PCBs a little time ago, and have some Questions.
I really don't understand electronics, but have allready built some
DIY PCB-based Modules with succes.
as long as they are working it's good ;)
Questions:
1. CGS29, Wave Multiplier
the question is about which wiring options one needs
( i allready asked at EM ( i'm Funky40) and got answers from fonik and
scott stites.
But after looking again to the CGS site, i'm confused again about the
wiring options.)
I tend to bring them all up to the Faceplate.( but this is very much )
So i put the question otherways:
A) what does i really not need ?
2.) CGS 31, digital noise
i'm not shure if i understand the wiring
A)CLK0 is the out of the 4046 that has to be normalized to the CLKI (
with a 1k res ), right ?
B) there are no Pots somewhere ?
3.) CGS 64, VCA
A) Can i solder normal caps to the SMD pads ?
I would like to build one Modul now as it will take some time till
i'll make my order where i get the SMD caps.
B ) there are different manufacturers for those caps.
should i care which one i choose ?
thanks in advance