Install the 330k in the position marked "330k" AND the jumper in the
position marked with a solid line,
OR
Install the 330k in the position with no value specified AND the jumper in
the position marked with a dashed line.
Pins 1 and 2 of the tube can be swapped by installing them in the two holes
next to the ones marked 1 and 2 (saves getting the wires crossed).
Ken
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
position marked with a solid line,
OR
Install the 330k in the position with no value specified AND the jumper in
the position marked with a dashed line.
Pins 1 and 2 of the tube can be swapped by installing them in the two holes
next to the ones marked 1 and 2 (saves getting the wires crossed).
Ken
>Hi Ken,on the side
>
>I noticed that my rev 1.1 pcbs have some jumper markings next to the tube,
>where the 330K resistor is. I can't quite tell how they should bepopulated. Could you
>explain?_______________________________________________________________________
>
>Romeo
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>