Something definitely NOT right here!
100k pot with one end to +15V and the other end to 0V or -15V. The wiper
goes through a 220k resistor to the input to limit the range a bit.
Ken
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
100k pot with one end to +15V and the other end to 0V or -15V. The wiper
goes through a 220k resistor to the input to limit the range a bit.
Ken
>I'm working on a Sequential Switch for sequencing. Each of the eight_______________________________________________________________________
>steps having an LED, a Gate Out jack, and a pot.
>
>If I use +15v off the PCB (right after the bead), should there be a
>resistor between that voltage and the pot? What size?
>
>I'm guessing there should be since I wired it up without one and it
>blew up the bead (a 10R resistor).
>
>Magic Smoke Drew
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>