Cgs synth

>It doesn't look as if this modification is reflected in the schematic
>and assuming that it isn't, is this modification the same as connecting
>the TL072-pin 5 to the negative side of the 47uF cap with a 100K
>resistor instead of just a plain old trace?

The trace goes to the wrong spot on the Rev0.4 board which is why it needs
to be cut. The resistor is just a "safety measure". The schematic is Rev0.2,
though apart from this additional resistor, should be correct.
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>