Cgs synth

Ken @ Richard, Thanks for your replies!

I'll put an attentuator after the CV In since the quantizer *should*
be at the output it's fine to attentuated non quantized signals from
e.g. my noise source without an output attentuator. My brief testing
with an quant. signal suggests that the ASR will output at least
fairly quant. signals as well. But that could be my (bad) hearing.
Best regards, Ingo

--- In cgs_synth@yahoogroups.com, Richard Brewster <pugix@...> wrote:
>
> I've used quantizers on the ASR inputs. There is a slight DC offset
> that's a little different on each of the three outputs. But sometimes
> the results are quite acceptable:
>
> http://pugix.com/synth/chords/
>
> I've got four quantizers now, but six ASR outputs!
>
> -Richard Brewster
>
> sasami@... wrote:
> >> At the moment I think of wiring a 100k pot after the CV input. .
While
> >> this is cool for some applications I wonder wether this knob will
> >> affect a quantized CV at the input in a way that it is no longer
> >> quantized at the output. What do you think?
> >>
> >
> > It will mess up the quantized signal in the same way as the CV
level pot
> > would on your VCOs. You really want the quantizer AFTER the ASR
(and yes,
> > that would mean one per output).
> >
> >
> >> I think about normalling the 2 Shift Register for one with six
stages.
> >> It's obvious that the Clock In 1 goes to the switch of the input jack
> >> of the Clock In 2. Could please s.o. confirm if it's ok to
connect the
> >> Stage 3 Output of the first shift register to the switch of the input
> >> jack of the CV In of the second one?
> >>
> >
> > It is perfectly okay to do so.
> >
> > Ken
> >
_______________________________________________________________________
> > Ken Stone sasami@...
> > Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> > Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>
> >
>