Cgs synth

Here are some photos of my CGS sequential switch in progress, using
the Bridechamber panel.

Drilling new holds for LEDs:
http://www.jefflaity.com/MOTM/seq/seq_drill.jpg

Completed board (aka the easy part):
http://www.jefflaity.com/MOTM/seq/seq_board.jpg

Jacks and most pots installed. I haven't installed the Bridechamber
lag or the voltage pots yet.
http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_01.jpg

Here's the back panel, not yet tidied up:
http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_02.jpg

This view shows how I attached the board to a large Bridechamber
bracket and attached it using the nuts behind the switches. I had to
modify the bracket with a nibbler to get the hole spacing right:
http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_03.jpg

Final shot, from the top. LEDs are individually shrinkwrapped. Jacks
are also from Bridechamber.
http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_04.jpg

I'll put up a proper webpage when it's finished. Don't post these
anywhere just yet. Let me know if you have any questions, -jl