hey thanks for those. i'm gonna do a frac version but that was real helpful.
On Sun, May 18, 2008 at 5:44 PM, Jeff Laity <synthetic@...> wrote:
> Here are some photos of my CGS sequential switch in progress, using
> the Bridechamber panel.
>
> Drilling new holds for LEDs:
> http://www.jefflaity.com/MOTM/seq/seq_drill.jpg
>
> Completed board (aka the easy part):
> http://www.jefflaity.com/MOTM/seq/seq_board.jpg
>
> Jacks and most pots installed. I haven't installed the Bridechamber
> lag or the voltage pots yet.
> http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_01.jpg
>
> Here's the back panel, not yet tidied up:
> http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_02.jpg
>
> This view shows how I attached the board to a large Bridechamber
> bracket and attached it using the nuts behind the switches. I had to
> modify the bracket with a nibbler to get the hole spacing right:
> http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_03.jpg
>
> Final shot, from the top. LEDs are individually shrinkwrapped. Jacks
> are also from Bridechamber.
> http://www.jefflaity.com/MOTM/seq/CGS_awaitspots_04.jpg
>
> I'll put up a proper webpage when it's finished. Don't post these
> anywhere just yet. Let me know if you have any questions, -jl
>
>
>
--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html
[Non-text portions of this message have been removed]
