Great! I love that module.
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com
On Nov 18, 2008, at 4:48 AM, stijncostermans wrote:
> all is working!!
>
> tnx scott
>
> I don't know why but I connected the clock wire also to the speed
> pot !
>
> --- In cgs_synth@yahoogroups.com, Scott Deyo <contact@...> wrote:
> >
> > Hi Stijn,
> >
> > The wiring is part of the schematic at:
> > http://cgs.synth.net/modules/burst_generator.html
> >
> > CO (clock out) is connected to the switch lug of CI (clock in).
> Without
> > this connected your 4017 is not getting the clock, and nothing will
> > happen at your outputs.
> >
> > I hope this helps!
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Nov 17, 2008, at 1:27 PM, stijncostermans wrote:
> >
> > > I guess a wireing diagram/drawing would help, I have nothing
> > > connected to the swich lugs of the jacks.
> > > the trigger from the internal oscillator I get comes from a pin
> on
> > > the ic, not from the jacks. at none of the jacks is any signal
> ore\
> > > voltage.
> > >
> > > --- In cgs_synth@yahoogroups.com, Richard Brewster <pugix@>
> wrote:
> > > >
> > > > I had a problem with my burst generators that was fixed by
> using a
> > > > different brand of CMOS IC. Hopefully you used IC sockets. I
> > > replaced
> > > > the first brand with Texas Instruments make, and all was well.
> > > Some
> > > > CMOS doesn't clock well at low frequencies.
> > > >
> > > > Richard Brewster
> > > > http://www.pugix.com
> > > >
> > > > Scott Deyo wrote:
> > > > > You're sure the oscillator is normaled to your clock input
> for
> > > the
> > > > > divider?
> > > > > I fixed someone's, and the switch and signal lugs were
> swapped on
> > > that
> > > > > jack.
> > > > >
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > > >
> > > > > On Nov 16, 2008, at 9:48 AM, stijncostermans wrote:
> > > > >
> > > > >
> > > > >> I just finished constructing a bridechamber burst generator
> kit
> > > > >> and .......it doesn't work!
> > > > >> ok I haven't got too much knowledge of electronics, but
> this is
> > > what I
> > > > >> can tell about the unit
> > > > >> the internal osc works fine (cd40106) the speed pot and
> range
> > > swich
> > > > >> work.
> > > > >> for the rest nothing works, no triggers whatsoever.
> > > > >> can anyone tell me how to go about debugging this thing?
> what
> > > voltages
> > > > >> I should read where.
> > > > >>
> > > > >> tnx
> > > > >>
> > > > >> cheers,
> > > > >> Stijn
> > > > >>
> > > > >>
> > > > >>
> > > > >>
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
[Non-text portions of this message have been removed]