Started doing the panel for the VCS, and wanted to be sure about some things. Sorry if this has been asked before.
- The output signals - is this correct :
http://www.guyd2.com/stuff/VCS_signals.gif
(not sure about the bias of AC Out)
- Are the Rise/Fall CV input pots wired for both negative & positive CV amount ?
- As far as I understand, the Exp. CV In (1V/Oct) does not affect the rate of Rise/Fall, but merely 'transposes' the signal ?
- The optional Processor section is simply a unity gain amp with either inverted or non-inverted output, right ? How can this be hard-wired to the VCS in- or outs for most effectiveness, ie. how can it be most useful when I don't bring it out to the frontpanel ?
thanks,
_g
- The output signals - is this correct :
http://www.guyd2.com/stuff/VCS_signals.gif
(not sure about the bias of AC Out)
- Are the Rise/Fall CV input pots wired for both negative & positive CV amount ?
- As far as I understand, the Exp. CV In (1V/Oct) does not affect the rate of Rise/Fall, but merely 'transposes' the signal ?
- The optional Processor section is simply a unity gain amp with either inverted or non-inverted output, right ? How can this be hard-wired to the VCS in- or outs for most effectiveness, ie. how can it be most useful when I don't bring it out to the frontpanel ?
thanks,
_g