Cgs synth

>And then it stops cycling.
>But that's just like a real DSG.

Replace the 10. in series with the cycle switch with a 1n, and the lock-up
should be avoided. I did the mod to some genuine DUSG with success.

Ken

>So no worries.
>
>Cheers,
>//Jon
>
>17 okt 2009 kl. 12.53 skrev Guy:
>
>> Started doing the panel for the VCS, and wanted to be sure about
>> some things. Sorry if this has been asked before.
>>
>> - The output signals - is this correct :
>>
>> http://www.guyd2.com/stuff/VCS_signals.gif
>>
>> (not sure about the bias of AC Out)
>>
>> - Are the Rise/Fall CV input pots wired for both negative & positive
>> CV amount ?
>>
>> - As far as I understand, the Exp. CV In (1V/Oct) does not affect
>> the rate of Rise/Fall, but merely 'transposes' the signal ?
>>
>> - The optional Processor section is simply a unity gain amp with
>> either inverted or non-inverted output, right ? How can this be hard-
>> wired to the VCS in- or outs for most effectiveness, ie. how can it
>> be most useful when I don't bring it out to the frontpanel ?
>>
>> thanks,
>> _g
>>
>>
>>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>