These days I would use 15k there, but the reality is in this particular
circuit it really doesn't matter if it's 22k or 2k2 because the Comp Sense
control compensates for it. My prototype would have had 2k2 in it because I
would have followed what is marked on the overlay.
Ken
a 2k2 as printed on the board? It's a Rev 2.0 board.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
circuit it really doesn't matter if it's 22k or 2k2 because the Comp Sense
control compensates for it. My prototype would have had 2k2 in it because I
would have followed what is marked on the overlay.
Ken
>Hi,the top of the board should actually be a 22k as shown on the schematic, not
>
>Can somebody please confirm for me that the resistor next to the LM358 at
a 2k2 as printed on the board? It's a Rev 2.0 board.
>_______________________________________________________________________
>Thanks
>Adam-V.
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>