Ian,
Well, it was some time ago and I do not recall what I did to solve it. Usually my build errors were around missing to solder a connection (I solder fast and tend to overlook a joint every other board), shorting two joints or a screwed up tranny / IC. it might have been the case in the drum sim.
Erez
Well, it was some time ago and I do not recall what I did to solve it. Usually my build errors were around missing to solder a connection (I solder fast and tend to overlook a joint every other board), shorting two joints or a screwed up tranny / IC. it might have been the case in the drum sim.
Erez
--- In cgs_synth@yahoogroups.com, "Ian Price" <bonkersseattle@...> wrote:
>
> Hello Erez,
>
> I just completed this module tonight and have the exact same problem. Tried to troubleshoot for awhile to no avail. Did you ever figure out the problem?
>
> --- In cgs_synth@yahoogroups.com, "ErezYaary" <erez@> wrote:
> >
> > Hi,
> >
> > After building my Drum Simulator and firing it up, it reacts well to triggers as well as a nice
> > basic sound.
> >
> > The only issue is that the pots have no effect on the sound. I have connected them each to its
> > respective double POT[x] connectors on board.
> >
> > Anything I might be doing wrong?
> >
> > Thanks,
> >
> > Erez Yaary
> >
> >
> > Web: http://www.yaary.com
> > Copies of my CDs could be found at: http://www.mellowjet.de
> >
>