Hi all -
I just finished building a "Best of CGS" SWAMP Sequener Panel
(flipping awesome BTW). But I'm having some difficulty w/ the CGS13
Gated Comparator module...... there appears to be a few issues. I have
never used a module like this (it's seem very unique - and I love
that) so ANY advice or experience with building and troubleshooting
this module would be greatly appreciated.
Issues found:
1 - Whenever the CV "SENS" knob is turned counter clockwise below 2-
oclock.... the "COMP OUT" LED turns on and a voltage is produced at
the "COMP OUT" jack.
2 - If an external clock is patched into the "CLOCK" input and you
turn the CV "SENS" knob below 2-oclock.... then each of the 8x stages
will light in turn sequentially following the clock pulse.
3 - If you create a "Loop Sequence".... then whenever "Stage 8" lights
up - the "COMP OUT" light/jack will light up along with it (at the
same time)
SO basically COMP OUT & Stage 8 seemed linked somehow - and the CV
SENS knob seem too sensitive (100k lin)
Any ideas?
I just finished building a "Best of CGS" SWAMP Sequener Panel
(flipping awesome BTW). But I'm having some difficulty w/ the CGS13
Gated Comparator module...... there appears to be a few issues. I have
never used a module like this (it's seem very unique - and I love
that) so ANY advice or experience with building and troubleshooting
this module would be greatly appreciated.
Issues found:
1 - Whenever the CV "SENS" knob is turned counter clockwise below 2-
oclock.... the "COMP OUT" LED turns on and a voltage is produced at
the "COMP OUT" jack.
2 - If an external clock is patched into the "CLOCK" input and you
turn the CV "SENS" knob below 2-oclock.... then each of the 8x stages
will light in turn sequentially following the clock pulse.
3 - If you create a "Loop Sequence".... then whenever "Stage 8" lights
up - the "COMP OUT" light/jack will light up along with it (at the
same time)
SO basically COMP OUT & Stage 8 seemed linked somehow - and the CV
SENS knob seem too sensitive (100k lin)
Any ideas?