Hi Ken and All
I built the Best of CGS Panel #3 last year and i have never been able to get rid of the signal bleed from the CGS 48 oscillators.
To describe what is happening : Even with nothing patched ; when i plug the panel's output into a mixer , even with the output turned all the way down , i can still hear the oscillators in the background regardless of whether i take my output signal from VCA's or from the Dual Mixer.
I am powering the panel with and elby all in one power module 30VA +/-15VDC.
I'm using a split output cable with the Earth coming off the Sleeve , Output signal is on the Tip. That Earth from the cable goes to a Banana Jack connected to the Power Module's main Earth Stud.
On the 15V side of the Power Module + , - and Earth is connected to the panel via CGS Distro which is insulated from the Chassis.
I have not taken any Earth Connection directly to the Chassis.
many thanks
Stephen
I built the Best of CGS Panel #3 last year and i have never been able to get rid of the signal bleed from the CGS 48 oscillators.
To describe what is happening : Even with nothing patched ; when i plug the panel's output into a mixer , even with the output turned all the way down , i can still hear the oscillators in the background regardless of whether i take my output signal from VCA's or from the Dual Mixer.
I am powering the panel with and elby all in one power module 30VA +/-15VDC.
I'm using a split output cable with the Earth coming off the Sleeve , Output signal is on the Tip. That Earth from the cable goes to a Banana Jack connected to the Power Module's main Earth Stud.
On the 15V side of the Power Module + , - and Earth is connected to the panel via CGS Distro which is insulated from the Chassis.
I have not taken any Earth Connection directly to the Chassis.
many thanks
Stephen