Cheers Ken
I figured out the VCF MKT locations by deduction and looking at the photo on the build page.
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Tuesday, January 24, 2012 10:38 AM
Subject: Re: [cgs_synth] CGS 29 (ver 2.1) and CGS 77 VCF (ver 1.1) - 100n capacitors
Good point.
Between ACI and DCI up near the power connector.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
I figured out the VCF MKT locations by deduction and looking at the photo on the build page.
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Tuesday, January 24, 2012 10:38 AM
Subject: Re: [cgs_synth] CGS 29 (ver 2.1) and CGS 77 VCF (ver 1.1) - 100n capacitors
Good point.
Between ACI and DCI up near the power connector.
>Just stuffing the MARSh and BOG pcb's.where the single MKT 100n needs to go.
>
>I am about to put in 100n caps to the Wave Mult 2.1 but i cant figure out
>__________________________________________________________
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]