Maybe it's working correctly?
From the CGS page:
"Note that this design is a little unusual in that the Gate input will sit at "ON" when nothing is connected to its jack. "
-TF
From the CGS page:
"Note that this design is a little unusual in that the Gate input will sit at "ON" when nothing is connected to its jack. "
-TF
--- In cgs_synth@yahoogroups.com, Stephen Richards <okayjustalittle@...> wrote:
>
> Hi Ken
>
> I have everything working on the MARSH panel except the ADSR's.
>
> I have installed the transistor marked in red on the build page backwards. I used a BC547 there though not a 2N3565.
>
> Everywhere else that required a 2N3565 , i used a 2N3904 in it's correct orientation.
>
>
> Everywhere else that required a 2N5089 , i used a 2N3904 in it's correct orientation.
>
>
> Everywhere else that required a 2N4250 , i used a BC557 in reverse orientation.
>
>
> I'm getting an led constantly lit at power up.
>
> Could any of this be the problem ?
>
> [Non-text portions of this message have been removed]
>