CW is wired to 0V
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Thursday, December 6, 2012 10:13 AM
Subject: Re: [cgs_synth] CGS77 - Serge VCF
Have you wired the CW terminal of the pot to -VE or 0V?
Ken
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Thursday, December 6, 2012 10:13 AM
Subject: Re: [cgs_synth] CGS77 - Serge VCF
Have you wired the CW terminal of the pot to -VE or 0V?
Ken
>Hi KenSerge VCF.
>
>I am just troubleshooting the BOG panel and am having problems with the
>'1o'clock' point on the pot's travel.
>When i move the Freq Pot the filter does not kick in until about the
>__________________________________________________________
>Below that point , nothing.
>
>Everything else seems to be working , all ins and outs doing what they should.
>
>I have swapped the LM3900 and this has had no effect.
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]