Cgs synth

hey ken;
thx very much it makes sense now :)
yeah it was writen "u1K100" and i red it wrong.
thx for your help ;)

--- In cgs_synth@yahoogroups.com, "cg_synth" wrote:
>
>
> You can check the parts FAQ http://www.cgs.synth.net/modules/parts_faq.html
>
> What you've written is a little confusing, but I think you have the right parts.
> u1 sounds to me like 0.1uf, or 100n. K is the tolerance. 100 is the voltage. In u1, the u is replacing the decimal point. u stands for micro farads, so u1 means 0u1, or 0.1uF. For the moment you can ignore the tolerance, and 100V is quite adequate, and can also be ignored.
>
> Ken
>
> --- In cgs_synth@yahoogroups.com, "blashol" wrote:
> >
> > Hi,
> >
> > i'm building the CGS58 ver1.1
> > i see on the pcb 100n (2 close to the 10uf capacitor) and one close to the TL072) in my modular chamber kit i got 3 1k100uF ..i'm not good at electronic but that really doesn't seem to match.but maybe i don't read the PCB right. are these 100nF capacitors i have to put on the board ? are these u1K100 in my kit a mistake ?
> >
> > thx for help :)
> >
>