My mistake as I assumed. I was reading the instructions wrong...
Thanks Ken.
These VCOs sounds great BTW.
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Friday, February 8, 2013 5:21 PM
Subject: Re: [cgs_synth] CGS VCO calibration
You are trimming the main output to on OCTAVE higher, not 1 volt higher. You
need to listen to it, not read it with a meter.
Ken
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
Thanks Ken.
These VCOs sounds great BTW.
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Friday, February 8, 2013 5:21 PM
Subject: Re: [cgs_synth] CGS VCO calibration
You are trimming the main output to on OCTAVE higher, not 1 volt higher. You
need to listen to it, not read it with a meter.
Ken
>Hello,the 1v in to the 1v/oct input adjusting the Span trimmer??
> Could anyone help me w/ which output I should calibrate to 1v higher than
>It is the second step in the "setting up" section in the notes.something incorrectly which I prob. am.
>The waveforms are unaffected by the Span trimmer unless I am doing
>Thanks__________________________________________________________
>-Steve
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]