Expo mode is feeding a changing voltage back into the unit. There will be
some change in it's frequency as a result.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
some change in it's frequency as a result.
> Here's something strange. I just hooked it up again. In cycle mode, if the_______________________________________________________________________
>fall and rate switches are in expo mode, raising the Fall CV or Rise CV
>pots will increase the freq. output up to the 12 o'clock position. Going
>past that position, the freq. will decrease slightly. If the switches are
>in the linear position, this doesn't happen.
>
> Also - Changing the fall or rise switch from linear to expo will lower the
>cycle mode freq. even with both CV pots at minimum.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>