Cgs synth

Been thinkng about this - The problem may also be caused by putting a
voltage on the input pins, which are designed for current, not voltage.
Check nothing is shorted to them. Check your resistor values. Maye sure you
haven't installed 15 ohms instead of 1M.

Ken

>Will do.Thanks guys!
>I'll report back when i get this working.
>
>--- In cgs_synth@yahoogroups.com, Richarius Molindarius

<richmolindarius@...> wrote:

>>
>> Use a well lit magnified lamp. Especially for that board. Hard to find
>> small trace breaks and bad solder joints.
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>