The LEDs are 3mm and 5mm and you buy the colour that is required (Red, Green, Yellow etc). You then either but White (clear) lens mounts to allow the LED body colour itself to come through or same colour lens mounts as the LEDs they fit.
In my kits I supply clear lens mounts and coloured LEDs
Best Regards
Laurie Biddulph
Mobile: 0400 257 645
Phone: +61 (0)2 4340 0938
Web: www.elby-designs.com
Skype: widgetoz
Elby Designs
9 Follan Close
Kariong
NSW 2250
Australia
From: cgs_synth@yahoogroups.com [mailto:cgs_synth@yahoogroups.com] On Behalf Of freq63@...
Sent: Sunday, November 03, 2013 6:40 PM
To: cgs_synth@yahoogroups.com
Subject: [cgs_synth] LEDs on SWAMP
In the infos I collected I got:
LED
2 x CGS31
13 x CGS36
1 x 8 CGS59A
TOTAL: 23
LED-3mm
9 x CGS13 only!!!
TOTAL: 9
I have no idea which one to buy for the "not-3mm" ones.
Do you have a Mouser reference for these 23 LEDs please?
Are all LEDs white and you just take lense for the colour like here?
http://mouser.com/ProductDetail/VCC/SMB200RTP/?qs=oNh6xPQP03lG1sCy9sazKg%3d%3d