On 2014-09-04 06:45 -0700, otherunicorn@... [cgs_synth] wrote:
output of the 7915 and ground should be 1 µF, not 100 nF. (100 nF
between output of 7-EIGHT-15 and ground is correct.)
In the parts list,
100n 4
should be replaced by
100n 3
1µF 1
from being reduced to 2.5 mm down from 5 mm.
--
André Majorel http://www.teaser.fr/~amajorel/
> it's about 15ma per rail. If that is the only module you have,Ken, there may be an error in the schematic. The cap between the
> you could run it on something like the CGS14
> http://www.cgs.synth.net/modules/cgs14_psu.html
output of the 7915 and ground should be 1 µF, not 100 nF. (100 nF
between output of 7-EIGHT-15 and ground is correct.)
In the parts list,
100n 4
should be replaced by
100n 3
1µF 1
> (no PCB available)If you make more, the hole spacing for that cap might benefit
from being reduced to 2.5 mm down from 5 mm.
--
André Majorel http://www.teaser.fr/~amajorel/