FWIW, if it's a short run, soldering to the nearest lug is probably
better anyway, as it doesn't risk damaging the tracks which can be
fragile. Rigid tinned wire is best for this IMO, and can look quite
neat.
Hope you find the fault.
cheers,
Dave
better anyway, as it doesn't risk damaging the tracks which can be
fragile. Rigid tinned wire is best for this IMO, and can look quite
neat.
Hope you find the fault.
cheers,
Dave
On 5 May 2015, at 13:36, spunraddish@... [cgs_synth] wrote:
> Yes, the correct tracks were cut, established in the continuity
> testing, and I also made sure that other tracks weren't cut -
> actually, instead of soldering directly to the tracks as was suggested
> in the diagram, I just went to the next closest solder lug, so my
> answer may lie there - how does one scrape off just enough solder mask
> to solder to the tracks, anyway?
>