16, 7 and 8 are fine. Anything below 5V is fine on pin 6 when the INH input is low. When the INH input goes high (i.e. gets a gate input), pin 6 will go to something over 7V (12V?). It's a digital input,so the exact voltage isn't important.
Make sure your diodes are not backwards.On Fri, Jun 26, 2015 at 12:36 PM, spunraddish@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:Hi Ken,
I've checked the mutliplexing 4051; I found that power is at ~ +11.25V at pin 16, and pins 7 and 8 are at -.69V. Pin 6 is at a steady 1.35V. Is that alright?Thanks,Eric
--