2) No, I don't sell the 102 and 108 separately because of licensing.
3) It does sound rather like you are 80% of the way to making it into a vocoder.
4) I do have enough WAD boards for the Jon S panel.
Ken
On Sat, Oct 3, 2015 at 1:43 AM, jammie.emma@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:creating an extended vc resonant eq
ken looking at the dcsm schematics if i use 10 x cgs102a/b for the crossfade mixer and 20 x cgs108 gain cells with a pot for the crossfade and and a socket for the cv this will take care of the mix q of the input/feedback
and if i add 10x cgs108 gain cells for the output of each of the eq cells for volume gain
with a pot for gain and cv input
with the resonant eq pcb
can i use the same pots 50k for the crossfade cv looks like i can wire it up the same way but instead of the return to the res eq pcb i take it to the cgs102a then from there it goes to the cgs102b then the cv goes to 2 cgs108 gain cells which are then summed and go to the eq cell
i see in the pcb,s for sale that the cgs102/ab and cgs108 are only for sale for the dcsm are they available separately.
also are the wad pcb,s still available as there is a new wad panel on muff
thanks
--