Look for wiring errors :) Seriously, start on the common board, and check around the current source - the "C" bus.
On Wed, Dec 9, 2015 at 10:06 AM, Neil Baldwin neil.a.Baldwin@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:Just finished wiring up one of two four-stage sequencers and on initial testing:
- all of the stage LEDs stay lit regardless of any clock input
- clock input doesn't seem to advance the steps in either directionAny pointers?
Thanks,
Neil
Sent from BlueMail
--