Cgs synth

Good advice Ken! Thanks again. That's pretty much the scheme I
envisioned, but the 1K resistor is a good idea.

The 6064 tube does very well with the 15 volt plate supply. Would
the sheet beam tubes perform this well?

Chub-feeling less isolated

>
> Don't isolate your grounds - it can cause potential build up between
> modules. What I do is make sure the metalwork of the PSU is

grounded to the

> mains ground, but ensure that the 0V line is isolated from ground.

I then

> put a 1k 2W to 5W resistor between the 0V line and the case ground.

This

> keeps the 0V line from jacking itself up, and prevents hum loops.

Of course

> you will need to make sure the PSU is not bolted to a common metal

chassis

> with the other supplies.
>
> Ken
>

______________________________________________________________________
_

> Ken Stone sasami@h...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies

<http://www.blaze.net.au/~sasami/>