I think I do... but which ones are they on the PCB? Is it the six
that connect to ground? It seems like the DA sections on the
PCB don't quite match what's on the schematic.
that connect to ground? It seems like the DA sections on the
PCB don't quite match what's on the schematic.
--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
> It is possible you have the "optional" 200k resistors at the MSB
position of
> the D/A ladders too. Check the diagram - it's the greyed out
resistor.
>
> Ken
>
> >I was testing out my Infinite Melody module this evening. The
Mix
> >output works well... like a Psycho LFO on steroids.
> >
> >The other three outputs have really low levels, even with the
> >output pots turned all the way up. Has anyone else
encountered
> >this? When I first tested the module, I'd forgotten to put in the
> >jumpers that provide -15V to the opamps for those stages.
> >Could that have fried them?
> >
> >Thanks,
> >
> >Romeo
> >
> >
> >
> >See the following URLS for the CGS Modular Synth home
page:
> >Main: http://www.cgs.synth.net/
> >Secondary: http://otherunicorn.0catch.com/synth/
> >To unsubscribe from this group, send an email to:
> >cgs_synth-unsubscribe@yahoogroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
__________________________________________________
_____________________
> Ken Stone sasami@h...
> Modular Synth PCBs for sale
<http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>