You can also add a third resistor to make a third CV input, but this
resistor will have only one end soldered to the PC board. My Synthacon
panel has a pot for initial frequency, an FM input jack with attenuator
pot, and a second CV input jack that is roughly 1V/oct, following Mr.
Loffink's suggestions.
-Richard Brewster
sasami@... wrote:
resistor will have only one end soldered to the PC board. My Synthacon
panel has a pot for initial frequency, an FM input jack with attenuator
pot, and a second CV input jack that is roughly 1V/oct, following Mr.
Loffink's suggestions.
-Richard Brewster
sasami@... wrote:
>>Under the LP and BP inputs on the PCB. It has 2 inputs for CV. I
>>guess the first is for the frequency. What is the second?
>>
>>
>
>Frequency too. One of them goes to the frequency pot.
>
>Ken
>_______________________________________________________________________
>Ken Stone sasami@... or sasami@...
>Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
>