Cgs synth

>1. Question:
>
> The 1k trimmer is a pot(?)

(a small dedicated trim-pot)

cut the wire going from the middle of the resonance pot, and solder the two
sides of the cut wire to the trim pot - one to the middle terminal, and the
other to one of the outside terminals (which outside terminal doesn't matter
- it just affects the rotation of the trimmer).

>2. Question:
>
>In the mod section it says:
>
>" I also added 220K of series resistance to the FREQ knob."
>
> Do I just put a 220k resistor from wire from the board to the
>middle terminal of the FREQ pot?

Best ask the person who did the mod :). Possibly between the +ve connection
and the top of the pot to limit the range.

Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>