Cgs synth

Ken,
My 2nd question is from your Synthacon mod webpage under...

"Notes from John Loffink"

Again it's...

" I also added 220K of series resistance to the FREQ knob."

Do I just put a 220k resistor from wire from the board to the
middle terminal of the FREQ pot?

I'd just like to understand how to do this.

Thanks

Dave

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:
>
> >1. Question:
> >
> > The 1k trimmer is a pot(?)
> (a small dedicated trim-pot)
>
> cut the wire going from the middle of the resonance pot, and
solder the two
> sides of the cut wire to the trim pot - one to the middle terminal,
and the
> other to one of the outside terminals (which outside terminal
doesn't matter
> - it just affects the rotation of the trimmer).
>
> >2. Question:
> >
> >In the mod section it says:
> >
> >" I also added 220K of series resistance to the FREQ knob."
> >
> > Do I just put a 220k resistor from wire from the board to the
> >middle terminal of the FREQ pot?
>
> Best ask the person who did the mod :). Possibly between the
+ve connection
> and the top of the pot to limit the range.
>
> Ken
>
__________________________________________________
_____________________
> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale
<http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies
<http://www.blaze.net.au/~sasami/>