chime board
2002-03-07 by sasami@hotkey.net.au
A possible modification for the chime board has been suggested by Sean. He
was finding the oscillator dampers were kicking too soon. His solution was
to increase the 100k resistor on pin 5 of IC2B to 330k. This affect the
cuttof point of both dampers.
Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
was finding the oscillator dampers were kicking too soon. His solution was
to increase the 100k resistor on pin 5 of IC2B to 330k. This affect the
cuttof point of both dampers.
Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>