Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

output pot with dc mixer/bandwidth filter

Re: output pot with dc mixer/bandwidth filter

2005-08-03 by bbluthang

--- In cgs_synth@yahoogroups.com, "mesonproductions"
<mesonproductions@y...> wrote:
Show quoted textHide quoted text
> hi,
> I'm building the stacked cgs30's.
> I need some clarification with the wiring of the out pot on the dc
mixer.

g'day
Ken's page on the CGS04 DC mixer has some helpful diagrams.
note this output pot has just 2 wires running to it and is not
connected to ground. The pot is optional and if you do use it, there
is a 47K resistor to be left off the board.
cheers
andrew

Re: output pot with dc mixer/bandwidth filter

2005-08-04 by brett x

Heya

I'lll try to pull mine out of my modular tonight and have a look. One
suggestion if you need a mixer as well is to wire up all the other inputs as
well and maybe put it in a single module beside your filter rather than just
using it for one input etc.

by the way how many filters are you putting together

cya
Brett
Show quoted textHide quoted text
>From: "mesonproductions" <mesonproductions@...>
>Reply-To: cgs_synth@yahoogroups.com
>To: cgs_synth@yahoogroups.com
>Subject: [cgs_synth] output pot with dc mixer/bandwidth filter
>Date: Wed, 03 Aug 2005 23:56:25 -0000
>
>hi,
>I'm building the stacked cgs30's.
>I need some clarification with the wiring of the out pot on the dc mixer.
>
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.