Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

CGS47 Cynare Drum Sim

CGS47 Cynare Drum Sim

2006-04-20 by Pete

Hi everybody. I'm preparing to build the Cynare Drum Sim and I would like
to add the 6 additional pots to be able to adjust the shimmer effect. After
reading the info on the site I'm a little confused on how to do this
correctly. Does anyone have a diagram on how to wire this? Has anyone tried
this mod?

thanks
pete



--
www.cubanpetemusic.com


[Non-text portions of this message have been removed]

Re: CGS47 Cynare Drum Sim

2006-04-20 by sasami@hotkey.net.au

Omit R1 to R6. Into one of each of the empty holes solder one end of a 10k
resistor. The other end of these resistors go to the wipers of the six 500k
pots. One of the outer tabs of these pots is wired to the other vacant hole
left by R1 - R6

Ken
Show quoted textHide quoted text
> Hi everybody. I'm preparing to build the Cynare Drum Sim and I would like
>to add the 6 additional pots to be able to adjust the shimmer effect. After
>reading the info on the site I'm a little confused on how to do this
>correctly. Does anyone have a diagram on how to wire this? Has anyone tried
>this mod?
>
>thanks
>pete
>
>
>
>--
>www.cubanpetemusic.com
>
>
>[Non-text portions of this message have been removed]
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: CGS47 Cynare Drum Sim

2006-04-20 by Pete

Hi Ken. I understand now. I did not understand how to install the 10k
resistors, but after looking at the picture of the module I noticed you have
them installed vertically. I know you mentioned this in your instructions
but a picture is worth a thousand words. Maybe in the future you could add a
few more pictures of your fully built modules. It really helps.

Thanks
pete
Show quoted textHide quoted text
On 4/20/06, sasami@... <sasami@...> wrote:
>
> Omit R1 to R6. Into one of each of the empty holes solder one end of a 10k
> resistor. The other end of these resistors go to the wipers of the six
> 500k
> pots. One of the outer tabs of these pots is wired to the other vacant
> hole
> left by R1 - R6
>
> Ken
>
>
>
> > Hi everybody. I'm preparing to build the Cynare Drum Sim and I would
> like
> >to add the 6 additional pots to be able to adjust the shimmer effect.
> After
> >reading the info on the site I'm a little confused on how to do this
> >correctly. Does anyone have a diagram on how to wire this? Has anyone
> tried
> >this mod?
> >
> >thanks
> >pete
> >
> >
> >
> >--
> >www.cubanpetemusic.com
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... or sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/<http://www.blaze.net.au/%7Esasami/synth/>
> >
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/<http://www.blaze.net.au/%7Esasami/>
> >
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>
>
>
> SPONSORED LINKS
> Sampler<http://groups.yahoo.com/gads?t=ms&k=Sampler&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=sxG9aCMlXQ2P1jigaHPKgA> Electronic
> instrument<http://groups.yahoo.com/gads?t=ms&k=Electronic+instrument&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=n1DVJ2f6zzk87Xy9WgTqnA> Music
> synthesizers<http://groups.yahoo.com/gads?t=ms&k=Music+synthesizers&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=f1VKnRbXcugaBBGn6yWKyA> Synthesizer
> music<http://groups.yahoo.com/gads?t=ms&k=Synthesizer+music&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=PIjlwR8yB3UeCuv4rLd8wQ> Electronic
> music<http://groups.yahoo.com/gads?t=ms&k=Electronic+music&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=4-pUEVkIS1ED1RG7UPJe_Q> Music
> sampler<http://groups.yahoo.com/gads?t=ms&k=Music+sampler&w1=Sampler&w2=Electronic+instrument&w3=Music+synthesizers&w4=Synthesizer+music&w5=Electronic+music&w6=Music+sampler&c=6&s=128&.sig=_zm_bk9pqHBz8vqDp9fhdg>
> ------------------------------
> YAHOO! GROUPS LINKS
>
>
> - Visit your group "cgs_synth<http://groups.yahoo.com/group/cgs_synth>"
> on the web.
>
> - To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com<cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------
>



--
www.cubanpetemusic.com


[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.